Continuous Emission Monitoring System
Power Supply: 100~240 VAC, 50/60 Hz
Power consumption: 165 W
Flue gas temperature: <220℃
Ambient temperature: 5℃~45℃
Gas pressure: 800~1200 mbar
Analog output: 8-Channel, 4~20 mA
Digital output: 4-Channel
Relay output: 4-Channel
Digital input: 2-Channel
Continuous CO Analyzing System
Sensor: NDIR (CO) / Zirconia (O2)
Display: 7″ LCD
Sample gas temperature: <1300℃
Sample gas moisture: <20%
Communication: RS 232-485
Power supply: 100~240 VAC, 50/60 Hz
Ambient temperature: 5℃~55℃
Analog output: 6-Channel ,4~20 mA
Relay output: 4-Channel
Laser gas detecting system
Measuring gas: NH3
Measuring range: 0-20 ppm
Resolution: 0.1 ppm
Repeatability: ≤1% Full Span
Linearity: ≤1% Full Span
Response time: 10 sec
Drift: ≤±1% Full Span
Preheating time: 30 min
Digital output: RS 232/485
Acid dewpoint analyzer
Acid dewpoint temperature: 100~250℃
Flue gas temperature: 0~400℃
SO3 concentration: 1~9999 ppm
H2SO4 concentration: 1~9999 ppm
Accuracy: ±2℃ Dewpoint temperature
Electrical safety: EN61010-2
EMC: EN61326(industrial grade)
Protection grade: IP42 of BS EN 60529
Power supply: 96~265 VAC ±10%, 50~60Hz
Temperature Transmitter
Measuring range: -200～1600℃
Power supply: 9～36 VDC
Output signal: 4～20 mA，0～5 V, RS 485
Accuracy: ±0.5℃
Ambient temperature: -40～85℃
Stability: ±0.1% FS/year
Protection grade: IP65
Pressure grade: 10 MPa
Maximum power: ≤0.02 Us (W)
Humidity Detector
Display: 4-bit high-definition digital
Measuring range: 0～40.0% VOL
Relative humidity: 0～100% RH
Resolution: 0.1%
Accuracy: ＜±1.5% FS
Repeatability: ＜±1%
Response time: T90＜15S
Analog output: 4～20m ADC
Sampling method: in-situ insertion